Integra Type R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (2001)
_mfi/Page-5308001.png)
Windshield Washer Motor: Testing and Inspection
WASHER MOTOR / TEST
1. Remove the front bumper.
2. Disconnect the 2-P connector from the washer motor.
3. Test the motor by connecting battery power to the A (+) terminal and ground to the B (-) terminal.
-
If the motor does not run or fails to run smoothly, replace it.
-
If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged pump outlet
in the motor.
