Legend V6-2494cc 2.5L SOHC FI (1986)
^
Between terminal 7 at the 10-P connector and terminal 2 at the handset harness connector.
^
Between terminal 7 at the handset harness connector and terminal 2 at the 10-P connector.
^
Between terminal 8 at the handset harness connector and terminal 1 at the 10-P connector.
Is there continuity in all three wires?
Yes - Go to the next step.
No - Repair open(s) in wire(s).[ ]
18.
Reconnect all connectors except the one on the handset harness. (Leave the handset connected to the transceiver.)
19.
Set your DVOM for volts, and check voltage between terminal 7 and terminal 1 at the 10-P control box connector. Watch the voltage reading as
you press the handset power button.
Does battery voltage drop to about 5 volts when you press the power button?