Legend V6-2494cc 2.5L SOHC FI (1986)
26.
Inspect the windshield side molding. If the molding is loose or if there is a gap between the molding seal and the windshield, remove the molding
as described in the service manual. Apply non-hardening weatherstrip adhesive where shown, then reinstall the molding.
PARTS INFORMATION
Weatherstrip, Left: P/N 72350-SD4-013 Weatherstrip, Right: P/N 72310-SD4-013
Inner Weatherstrip, Left: P/N 72375-SD4-020 Inner Weatherstrip, Right: P/N 72335-SD4-020 Inner Weatherstrip Clip A:
P/N 72380-SD4-000 (4 per side) Inner Weatherstrip Clip B:
P/N 72382-SD4-000 (2 per side)
Glass Run Channel Seal, Left: P/N 72275-SD4-J01 Glass Run Channel Seal, Right: P/N 72235-SD4-J01
EPT Sealer, 5t: P/N 06991-SA5-000 EPT Sealer, 10t: P/N 06992-SA5-000 3M Non-hardening Weatherstrip Adhesive, (or equivalent): 3M P/N
051135-08011
Door Trim:
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out-of-warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must
request consideration, and get the DSM's decision, before starting work.
Failed P/N:
72375-SD4-000
Defect code:
060
Contention code:
B99