Legend V6-2494cc 2.5L SOHC FI (1986)
Wheel Speed Sensor: Service and Repair
Fig. 16 Front wheel sensor replacement
Fig. 17 Rear wheel sensor replacement
On models equipped with air bag restraint system, use extreme care when working around fender area to avoid activation of restraint
system. All electrical harnesses for this system are covered with a yellow outer insulation, with related components located in the steering
column, center console, dash panel and front fenders.
1.
Disconnect battery ground cable and sensor electrical connector.
2.
Refer to Figs. 16 and 17 for replacement. When replacing sensors, avoid twisting wires during installation. Use white line on wires as a guide for
proper routing of wires.
3.
After sensor replacement is completed, check for proper sensor operation as follows: