Legend V6-2494cc 2.5L SOHC FI (1986)
6.
Remove piston boot and seal.
Assembly & Installation
1.
Clean caliper bore and piston with brake fluid and inspect for excessive wear or damage.
2.
Apply suitable grease to new piston seal, then install the seal in cylinder groove.
3.
Install piston boot, then apply clean brake fluid to piston and cylinder and install piston. Ensure dished end of piston faces inward.
4.
On Legend models, install pad spring in caliper.
5.
On all models, install caliper in reverse order of removal.