acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Radiator Cap > < Heater Unit/Core Replacement|Page 1702
Page 1
background image

Radiator: Service and Repair

1. Drain engine coolant, then disconnect upper and lower radiator hoses from radiator.
2. On models with automatic transaxles, Disconnect ATF cooler lines from radiator.
3. Disconnect fan motor electrical connectors.
4. Remove radiator upper support brackets.
5. Pull radiator out of engine compartment, then remove fan shroud assemblies from radiator.
6. Reverse procedure to install.

Radiator Cap > < Heater Unit/Core Replacement|Page 1702