Legend V6-2494cc 2.5L SOHC FI (1986)
Fig. 9 Power steering control unit exploded view
3.
Remove 2 flange bolts, valve body cap and gasket, Fig. 9.
4.
Remove cut-off valve and spring, then separate valve body from port housing.
5.
Remove seal and dowel pins from valve port housing.
6.
Remove rollers from control valve by pushing control valve out one side of housing then the other. When removing rollers, hold plungers with
fingers to prevent them from popping out.
7.
Remove plungers, return springs and control valve, Fig. 9.
Fig. 10 Sensor orifice removal
