Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
23.
Reinstall the door panel. Make sure the front of the inner weatherstrip butts up against the glass run channel seal.
24.
Using a trim pad remover, remove the original door weatherstrip, then install the new weatherstrip (listed under PARTS INFORMATION). Apply
some weatherstrip cement under the upper rear corner of the weatherstrip, as shown.
NOTE:
To replace the weatherstrip, temporarily disconnect the door's detent rod.
25.
Remove the door sill molding, kick panel, and center pillar lower trim. Remove the original door trim, then install the new door trim (listed under
PARTS INFORMATION). Reinstall the center panel trim, kick panel, and door sill molding.
