Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
If necessary, loosen and adjust the rear glass guide until "H" is within spec at positions 6 through 9.
You may have to go back and forth between the stopper plate and rear guide adjustments to get all nine positions within spec. After completing the
adjustments, realign the front sash with the glass. Record all the "H" measurements (with "B" at 25 mm) on the worksheet.
8.
Remove the adjusting tool and allow the door glass to seek its normal, relaxed position. Measure "B" at all 12 positions shown on the
worksheet, and record those measurements on the worksheet. "B" should be 13.0 +/- 1.0 mm with the glass in the relaxed position.
9.
If "B" is out of spec, adjust the glass camber by turning the door glass guide adjusters until "B" is 13.0 +/- 1.0 mm at as many of the 12
positions as possible. You may not be able to adjust all 12 positions to spec, especially positions 10 through 12.
