acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest:|89016|Page 4709 > < Brake Hose/Line|Locations|Page 4703
Page 1
background image

Hydraulic Control Assembly - Antilock Brakes: Customer Interest
Antilock Brakes - Modulator Reservoir Overflows

YEAR

MODEL

VIN APPLICATION

'87-89

LEGEND

See VEHICLES

L and LS

AFFECTED

July 24, 1989

BULLETIN NO.

89-016

ALB Modulator Reservoir Overflows

SYMPTOM

The top of the ALB modulator reservoir is wet with brake fluid, yet there is nothing apparently wrong with the ALB system (no ALB warning light, no
code on the ALB control unit).

PROBABLE CAUSE

During ALB operation, high pressure brake fluid returning to the ALB modulator reservoir may foam. A small amount of foamed brake fluid may escape
through the vent in the modulator reservoir cap. VEHICLES AFFECTED

Coupe:

Through VIN JH4KA3 . . . KC015312

Sedan:

Through VIN JH4KA4 . . . KC027352

CORRECTIVE ACTION

Replace the modulator reservoir filter with the new type (listed under PARTS INFORMATION) which allows foamed fluid to move back into the
reservoir more freely. After replacing the filter, refill the modulator reservoir to the MAX level.
PARTS INFORMATION

Modulator Reservoir Filter:

P/N 57193-SG0-802

WARRANTY CLAIM INFORMATION

In warranty:

The normal warranty applies.

Out-of-warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must

Customer Interest:|89016|Page 4709 > < Brake Hose/Line|Locations|Page 4703