Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
Water Pump: Service and Repair
Removal
NOTE:Use new O-rings and new special bolts when reassembling.
CAUTION:Wait until the engine has cooled down to prevent burns.
Fig. 45 Water pump replacement. Legend
1.
Drain the radiator coolant.
2.
Turn crankshaft so No. 1 piston is at TDC.
3.
Disable coded theft protection system as described under Accessories and Optional Equipment / Antitheft and Alarm Systems / Service and
Repair.
4.
Disarm airbag system as described under Air Bags and Seat Belts / Air Bags (Supplemental Restraint Systems) / Airbag System Disarming.
5.
Remove engine electrical harness.
6.
Remove breather pipe.
7.
Remove vacuum pipe bracket.
8.
Remove alternator, A/C and power steering belts.
9.
Remove upper timing belt covers, Fig. 64.
10.
Remove crankshaft pulley.
