Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
7. Insert the special tool into the compressor aligning the cutout of the remover with the metal pawl of the seal case.
8. Rotate the special tool clockwise or counterclockwise to make sure that the cutout is engaged with the metal pawl.
9. Press the remover until it bottoms, then turn it counterclockwise as far as it will go.
10. Withdraw the remover.
11. Lay down the compressor and clean the shaft seal contacting face of the compressor with cleaning solvent.
CAUTION:
-
Keep the cleaning solvent and dirt out of the compressor.
-
Use only a lint free cloth for cleaning.
-
Do not spill the refrigerant oil from the compressor. Refill the same amount of the oil if the oil is spilled out.
