acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Component Tests and General Diagnostics > < Climate Control System|Page 5611
Page 1
background image

Control Assembly: Initial Inspection and Diagnostic Overview

SELF-DIAGNOSIS INDICATORS 

The Automatic Climate Control System has a built-in self-diagnosis feature.

If a problem is suspected, turn the ignition switch OFF for at least one minute. Then turn the ignition switch ON and push both the AUTO and
OFF buttons on the control panel at the same time
. Any problems in circuits A - G will be indicated by the respective LED coming on.

The climate control unit does not memorize the Self -diagnosis indicator lights. If the ignition switch is turned OFF for approximately one minute
or more, the indicator light memory will be lost.

NOTE: 
-

Before replacing any component, recheck that all connector terminals and wires are secure.

-

The term "Intermittent Failure" means a system may have had a failure, but it checks out OK through all your tests. You may need to road test
the car to reproduce the failure, or, if the problem was a loose connection, you may have unknowingly solved it while doing the tests.

Component Tests and General Diagnostics > < Climate Control System|Page 5611