Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
Ignition Cable: Testing and Inspection
CAUTION: Carefully remove the ignition wires by pulling on the rubber boots. Do not bend the wire or the conductor may be broken.
1. Check the condition of the wire terminals. If any terminal is corroded, clean it, and if it is broken or distorted, replace the wire.
2. Connect ohmmeter probes and measure resistance.
Ignition Wire Resistance: 25,000 ohms max. at 20°C (70°F)
3. If resistance exceeds 25,000 ohms, replace the ignition wire.
