Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
8. Turn the ignition switch to the START position. Battery voltage should be available.
^
If there is no voltage, check the wiring between the ignition switch and main relay as well as the No.13 (7.5A) fuse.
9. Connect a jumper wire between the two BLK/YEL wires (5) and (7).
10. Turn the ignition switch ON. The fuel pump should work.
^
If the fuel pump does not work, check the wiring between the main relay and fuel pump, and the wiring from the fuel pump to the ground
(BLK) wire.
