Legend Coupe V6-2675cc 27L SOHC FI (1988) Seat Belt Systems | Seat Belt Component Information
1.
Remove the windshield side moldings as shown in the service manual.
2.
Thoroughly clean the surface on the A-pillar between all the molding clips with 3M General Purpose Cleaner, or equivalent.
3.
Cut strips of EPT sealer and fit them between the molding clips.
4.
Apply a bead of black 3M Super Silicone Sealant on the underside of the front side molding, as shown above.
NOTE:
Fit the molding from the angle shown. Make sure the EPT strips are compressed before you clip the molding in place.
PARTS INFORMATION
EPT 10T (P/N: 06990-SA5-000)
3M General Purpose Adhesive Cleaner (3M P/N: 08984)
Black 3M Super Silicone Sealer (3M P/N: 08664)
WARRANTY CLAIM INFORMATION
Operation number: 831000
Flat rate time: 0.8 hour for both sides
Failed P/N: 73152-SGO-023 (side molding, right)
Defect code: 042
Contention code: B07