Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
Transmission Speed Sensor: Testing and Inspection
Off-Vehicle Test
Removal/Inspection
1. Remove the 6 mm bolt from the transmission housing and remove the A/T speed pulser assembly.
2. Bring a magnet close to the A/T speed pulser assembly and check for continuity.
A/T speed pulser assembly is in good condition if there is:
-
Continuity with a magnet close to the pulser assembly.
-
No continuity with a magnet away from the pulser assembly.
If the A/T speed pulser is normal, inspect Speed Pulser Rotor (internal component - requires transaxle disassembly).
3. Replace the O-ring with a new one before reassembling the A/T speed pulser.
CAUTION: Carefully inspect the A/T speed pulser before installing. Do not install it that shows signs of being dropped or improperly handled.
