acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Window Seal:|89017|Page 7674 > < All Technical Service Bulletins for Window Seal:|89017|Page 7672
Page 7
background image

20.

Remove the original inner weatherstrip from the door panel, then install the new inner weatherstrip (listed under PARTS INFORMATION).

NOTE:

The clips that attach the inner weatherstrip to the door panel are easily broken. Their part numbers are listed under PARTS INFORMATION.

21.

Raise the window fully. Measure the distance from the interior side of the inner door skin to the door glass at the three points shown. The distance
should be 14-15 mm.

22.

To adjust the distance, hold the door at both ends and, using some form of knee protection, gently push your knee against the top of the inner door
skin. Make final adjustments at the clip locations with pliers.

All Technical Service Bulletins for Window Seal:|89017|Page 7674 > < All Technical Service Bulletins for Window Seal:|89017|Page 7672