Legend Coupe V6-2675cc 2.7L SOHC FI (1988)
16.
Reinstall the outer molding. Tap the outer molding forward until there is no gap between it and the corner molding.
17.
Use pieces of EPT sealer to fill the gaps in the corners of the mirror mounting area, as shown.
18.
Reinstall the door mirror. If any gaps exist between the mirror base gasket and the door, seal them with non-hardening weatherstrip adhesive.
Reconnect the mirror harness and secure the harness clip to the door. Don't install the inner cover panel yet.
19.
Cut two 30 x 30 mm pieces of EPT sealer 10t. Install the EPT under the ends of the door panel where it slips over the inner door skin, as shown.
