Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
2.
Disconnect the 12-P C316 connector in the interior fuse box.
3.
Insert the 12-P male connector of the diode sub-harness into the C316 cavity.
4.
Insert the C316 male connector, just disconnected from the fuse box, into the 12-P female connector of the diode sub-harness.
5.
Disconnect the C318 connector from the interior fuse box.
6.
Loosen the terminal retainer on the C318 male connector just enough to insert the loose pin of the diode sub-harness into cavity # 6.
NOTE:
Be careful not to pull the retainer all the way out, or you will have to re-thread the connector wires.
7.
Push the terminal retainer back in, locking the diode sub-harness pin in place.
