Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
15.
With the antenna tube properly adjusted, mark the tube and the antenna assembly with a felt-tip marker to note the alignment.
16.
Remove the antenna assembly from the car.
17.
Check the alignment of the antenna tube to the antenna assembly; then tighten the clamping screw. Once you have clamped the tube in place, go to
step 19.
18.
Insert the antenna tube with an alignment mark into the antenna assembly. Align the mark on the antenna tube with the clamping screw hole on the
antenna assembly; then secure the tube with the clamping screw removed in step 6.
19.
Legend only: Install the mounting bracket onto the antenna tube.
20.
If the antenna nut did not have an O-ring on it, install a new collar seal into the antenna collar.
