Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Front Bumper Cover / Fascia: By Symptom
Front Bumper Face - Pulls Loose
YEAR
1991 - 94
MODEL
LEGEND
VIN APPLICATION
ALL
BULLETIN NO
94-006
June 21, 1994
Front Bumper Face Pulls Loose
PROBLEM
The lower bumper face pulls loose from its mounts if it comes in contact with a curb, parking lot divider, or similar object when the car is backing up.
CORRECTIVE ACTION
Reverse the overlap of the lower bumper face and the splash shield, and reinforce the mounting points with large washers.
1.
Raise the vehicle on a hoist.
2.
Remove the two lower bumper face plastic mounting fasteners.
3.
Remove the three 6 mm bolts that mount the front of the splash shield to the subframe (visible through the square holes in the lower bumper face).
4.
Pull out the front edge of the splash shield, and place it on top of the lower bumper face.
5.
Reinstall the two plastic fasteners in the lower bumper face. Replace them if they are damaged (see PARTS INFORMATION).