Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
35.
Place the seat in the car, and reconnect the electrical connectors.
36.
Coupe Only - Install the lower seat belt pivot 10 the seat belt presenter. Tighten the bolt to 32 N.m (3.2 kg-m, 23 lb-ft). Install the plastic cap.
37.
Install the four seat track mounting bolts, and tighten them to 35 N.m (3.5 kg-m, 25 lb-ft). Install the tour seat track covers.
38.
Install the headrest onto the driver's seat.
39.
Move the seat bottom and seat back through their full ranges to make sure they do not bind.
[NEW] 40. To confirm that the rocking has beer eliminated, perform the DIAGNOSIS procedure.
PARTS INFORMATION
Front elevation motor assembly: 81518-SP0-A21
Rear elevation motor assembly: 81519-SPO-A21
[NEW] Bushing kit:
81510-SPO-315
(kit includes 11 bushings and five bolts. Only seven bushings are required to do one seat.)
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.
Operation number:
851168
[NEW] Flat rate time:
1.7 hours [Includes installing
bushings and replacing motor(s),
if necessary]
Failed P/N:
81518-SPO-A21
Defect code:
061
Contention code:
B99
Disclaimer