Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Brake Bleeding: Service and Repair
With Anti-Lock Brake (ALB) Checker
Air Bleeding with ALB Checker
1. Disconnect the 6-P inspection connector from the cross-member under the passenger's seat and connect the inspection connector to the ALB
checker.
CAUTION: Place the vehicle on level ground with the wheels blocked. Put the transmission in neutral for manual transmission models, and in
P for automatic transmission models.
2. Bleed high-pressure fluid from the maintenance bleeder with the special tool.
3. Fill the modulator reservoir to the MAX level.
NOTE: Do not reuse aerated brake fluid that has been bled from the power unit.
4. Start the engine and release the parking brake.
5. Turn the Mode Selector to 2, 3, 4, 5 and press the Start Test button.
-
Visually inspect the kickbacks of the brake pedal.
-
There should be at least two kickbacks. If not, repeat steps 2 through 5, as necessary.
