Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Cruise Control Switch: Testing and Inspection
Set/Resume/Cancel Switch
Fig. 1 Supplemental Restraint System Connector
1.
To avoid accidental deployment and possible injury, always install protective short connector on inflator connector when harness is disconnected.
2.
Remove dashboard lower panel.
3.
Remove steering wheel maintenance lid A and disconnect cable reel harness and airbag assembly 2-P connector. Connect short connector (red) to
airbag connector, Fig. 1.
4.
Remove steering column lower cover and disconnect cable reel connector. Connect SRS test harness C to cable reel connector.
Fig. 25 Column Harness
