Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Compressor Clutch: Testing and Inspection
Component Test - Automatic Climate Control
1. Check pulley bearing play and drag by rotating the pulley by hand. Replace the pulley with a new one if it is noisy or has excessive play/drag.
2. Check resistance of the field coil:
Field Coil Resistance: 3.6 ± 0.2 ohm at 20°C (68°F)
If resistance is not within specifications replace the coil.
3. Measure the clearance between the pulley and pressure plate all the way around. If the clearance is not within specified limits, the pressure plate
must be removed and shims added or removed as required, following the procedure on the next page.
Clearance: O.5 ± 0.15 (0.020 ± 0.006 in)
