Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
CAUTION: After reinstalling the heater-evaporator follow the sequence described in the air bleed procedure. If you don't, you may leave air in
the system which could damage the engine.
HEATER-EVAPORATOR OVERHAUL
1. Remove the heater core cover, remove the clamps from the inlet and outlet lines, then lift out the heater core.
2. Remove the upper half of the housing, then remove the evaporator.
3. Remove the expansion valve if necessary.
4. Assemble the heater-evaporator unit in the reverse order of disassembly. Hold the expansion valve capillary tube down against the suction line,
and wrap it with tape to hold it there.
