Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Heater Core: Service and Repair
Automatic Climate Control
SRS wire harness is routed near the heater.
WARNING: All SRS wire harnesses and connectors are colored yellow. Do not use electrical test equipment on these circuits.
CAUTION: Be careful not to damage the SRS wire harnesses when servicing the heater.
HEATER-EVAPORATOR UNIT REMOVAL
1. Remove the dashboard. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
2. Remove the blower. See: Housing Assembly HVAC/Service and Repair
3. When the engine is cool, drain the coolant from the radiator.
WARNING:
-
Do not remove the radiator cap when the engine is hot; the coolant is under pressure and could severely scald you.
-
Keep hands away from the radiator fan. The fan may start automatically without warning and run for up to 30 minutes, even after
the engine is turned off.
CAUTION: Radiator coolant will damage paint. Quickly rinse any spilled coolant off pained surfaces.
4. Disconnect the heater hoses at the heater. Coolant will run out when the hoses are disconnected, drain it into a clean drip pan.
5. Disconnect the heater valve cable from the heater valve.
