acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Fresh Air/Recirculation Control Box|Page 8752 > < Fresh Air/Recirculation Control Box|Page 8750
Page 1
background image

Housing Assembly HVAC: Service and Repair
Automatic Climate Control

SRS wire harness is routed near the heater.

WARNING:  All SRS wire harnesses and connectors are colored yellow. Do not use electrical test equipment on these circuits.

CAUTION: Be careful not to damage the SRS wire harnesses when servicing the heater.

HEATER-EVAPORATOR UNIT REMOVAL 

1. Remove the dashboard. 
2. Remove the blower. 
3. When the engine is cool, drain the coolant from the radiator.

WARNING:
-

Do not remove the radiator cap when the engine is hot; the coolant is under pressure and could severely scald you.

-

Keep hands away from the radiator fan. The fan may start automatically without warning and run for up to 30 minutes, even after
the engine is turned off
.

CAUTION: Radiator coolant will damage paint. Quickly rinse any spilled coolant off pained surfaces.

4. Disconnect the heater hoses at the heater. Coolant will run out when the hoses are disconnected, drain it into a clean drip pan.

5. Disconnect the heater valve cable from the heater valve.

Fresh Air/Recirculation Control Box|Page 8752 > < Fresh Air/Recirculation Control Box|Page 8750