acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest for Center Mounted Brake Lamp:|91030|Page 11381 > < Brake Light Switch|Locations
Page 1
background image

Center Mounted Brake Lamp: Customer Interest
Hi Mount Brake Light - Rattle

YEAR

MODEL

VIN APPLICATION

1991

LEGEND

ALL

COUPE

May 20, 1991

BULLETIN NO. 91-030

High Mount Brake Light Rattle

SYMPTOM

Rattle from the rear shelf.

PROBABLE CAUSE

Clearance between the rear shelf and the brake light housing.

CORRECTIVE ACTION

Apply EPT 5T to the bottom of the light housing.

1.

From inside the trunk, remove the bulb socket and the two mounting nuts from the high mount brake light.

2.

Remove the brake light from the rear shelf and turn it upside down.

3.

Cut a 5x150 mm piece of EPT 5T sealer.

4.

Center and apply the EPT to the bottom of the light housing, along the rear edge, as shown.

5.

Reinstall the high mount brake light as close to the rear window as possible, tighten the mounting nuts, and reinstall the bulb socket.

PARTS INFORMATION

EPT 5T P/N 06991-SA5-000

WARRANTY CLAIM INFORMATION

In warranty:

The normal warranty applies.

Out-of-warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must
request consideration, and get the DSM's decision, before starting work.

Operation number:

714050

Flat rate time:

0.3 hour

Failed P/N:

34270-SP0-A01

Customer Interest for Center Mounted Brake Lamp:|91030|Page 11381 > < Brake Light Switch|Locations