acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Campaign - Throttle Body Replacement|Page 5970 > < Campaign - Throttle Body Replacement|Page 5968
Page 2
background image

16.

Check the throttle cable free-play. It should have 10-12 mm of deflection. If it is out of specification, adjust it according to the procedure on page
11-112 of the service manual.

17.

Check the cruise control cable adjustment according to the procedure in the service manual (Sedan: page 23-324, Coupe: page 23-350). Adjust if
necessary.

18.

Start the engine and allow it to reach normal operating temperature (cooling fan comes on).

19.

Set the idle speed:

^

Connect a tachometer to the igniter loop or the tachometer connector.

^

Disconnect the 2-P connector from the EACV.

^

Turn on the headlights (high beam), the rear window defogger, and the heater blower fan (high speed). Make sure the A/C is off.

^

Adjust the idle speed to 500 +/- 50 rpm with the transmission in Neutral or Park.

20.

Turn off the engine and headlights, reconnect the EACV connector, and remove the tachometer.

21.

Remove fuse 15 from the under-dash fuse box for 15 seconds to reset the ECM.

22.

Reinstall the throttle body cable cover.

Campaign - Throttle Body Replacement|Page 5970 > < Campaign - Throttle Body Replacement|Page 5968