Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Power Seat Control Unit: All Technical Service Bulletins
Seat Memory Beeps or Fails to Recall Position
YEAR
1991-92
MODEL
LEGEND
VIN APPLICATION
See VEHICLES AFFECTED
June 29, 1992
BULLETIN NO.
92-016
Seat Memory Beeps or Fails to Recall
SYMPTOMS
When a seat position is recalled:
1.
The seat memory beeps twenty times.
2.
The seat does not move, or moves to the wrong position.
PROBABLE CAUSE
The number of pulses required to recall the seat position exceeded the control unit's memory capacity, causing it to lose the memorized position.
VEHICLES AFFECTED
1991:
All
1992 Sedan: thru VIN JH4KA7 . . . NC020994
1992 Coupe: thru VIN JH4KA8 . . . NC002652
CORRECTIVE ACTION
Replace the power seat control unit with the appropriate updated unit listed under PARTS INFORMATION.
1.
Move the seat backward. Remove the front seat track covers and mounting bolts.
2.
Move the seat forward. Remove the rear seat track covers and mounting bolts.
3.
Lift the front of the seat and support it with a 10 in. long piece of wood.
4.
Remove the two mounting screws and the front cover.
5.
Remove the slide joint cable.
6.
Remove the four mounting bolts for the control unit. Disconnect the three electrical connectors and remove the control unit.
7.
Connect the electrical connectors to the new control unit. Mount the control unit with the original bolts, tighten them securely.
