acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Airbag Assembly Removal|Page 9011 > < Airbag Assembly Removal|Page 9009
Page 3
background image

9. Reconnect the side wire harness 3-P connector to the right pretensioner and the main wire harness 3-P connector to the left pretensioner.

10. Reinstall the quarter trim panel.

11. Reconnect the battery positive cable, then the negative cable.

12. After installing the airbag assembly, confirm proper system operation:

-

Turn the ignition to II: the instrument panel SRS indicator light should go on for about 6 seconds and then go off.

-

Confirm operation of horn buttons.

-

Confirm operation of cruise control set/resume switch.

-

Enter the customer's code number to restore radio operation.

Airbag Assembly Removal|Page 9011 > < Airbag Assembly Removal|Page 9009