Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
2.
Verify that the cable reel is centered; the yellow geartooth is lined up with the alignment mark on the cover. Install the cable reel holding fixture in
the cable reel assembly as shown. Use a Torx T-10 wrench.
3.
Disconnect the 6-P connector, then remove the cable reel assembly.
CABLE REEL INSTALLATION PROCEDURE
1.
Verify that the front wheels are still pointed straight ahead.
2.
Reinstall the cable reel assembly, and reconnect the 6-P connector.
3.
Remove the cable reel holding fixture.
4.
Follow the service manual procedure for reinstallation of the steering wheel, airbag, steering column covers, and dashboard covers.
5.
Verify SRS operation as described in the service manual. Road test the vehicle.
^
If the steering wheel spoke angle is not correct, change it by adjusting the tie rod ends. Do not remove and reposition the steering wheel.
PARTS INFORMATION
Cable reel holding fixture:
For 1991-95 Legend and 1994-95 Integra
P/N 77900-SPO-999
