acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest for Glove Box Lamp Switch:|92-026|Page 1562 > < Brake Light Switch|Locations
Page 1
background image

Glove Box Lamp Switch: Customer Interest
Interior - Glove Box Light Stays ON

September 21, 1993

BULLETIN NO.
92-026

[NEW] YEAR
1991-93
1994

MODEL
LEGEND 
INTEGRA

VIN APPLICATION
See VEHICLES AFFECTED

Glove Box Light Stays On
(Supersedes 92-026, dated September 15, 1992)

SYMPTOM

The glove box light stays on when the glove box lid is closed. This is noticeable at night when the headlights are on and the inside of the car is dark; you
can see a glow around the glove box lid.

PROBABLE CAUSE

The glove box switch plunger is too short.

VEHICLES AFFECTED [NEW]

LEGEND: All 1991 - 93
INTEGRA: 1994 3-door
GS-R: Thru VIN JH4DC2...R001075
LS: Thru VIN JH4DC4...R5009083

CORRECTIVE ACTION

Install the glove box tube cap listed under PARTS INFORMATION to lengthen the switch plunger.

1.

Using a sharp utility knife, shorten the glove box tube cap to 12 mm.

2.

Press the tube cap over the glove box switch plunger.

3.

Turn the headlights on, and confirm that the glove box light goes off when the glove box lid is closed.

PARTS INFORMATION

Glove Box Tube Cap: P/N 34254-SP0-308 [NEW]

WARRANTY CLAIM INFORMATION

Customer Interest for Glove Box Lamp Switch:|92-026|Page 1562 > < Brake Light Switch|Locations