Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Steering Gear: Service and Repair
Removal and Installation
1.
Disable coded theft protection system as described under Accessories and Optional Equipment / Antitheft and Alarm Systems / Service and
Repair.
2.
Disarm airbag system as described under Air Bags and Seat Belts / Air Bags (Supplemental Restraint Systems) / Airbag System Disarming.
3.
Raise and support front of vehicle.
4.
Remove front wheels.
5.
Remove ball joint assembly.
6.
Remove underbody splash guard.
7.
Drain power steering fluid into a suitable container.
8.
Thoroughly clean steering gear unit and surrounding area.
9.
Remove RH side hoses and clamps.
10.
Disconnect control unit four lines.
11.
Remove steering gear pipe clamps.
12.
Remove steering joint bolt, then separate steering gear pinion shaft and column shaft.
Fig. 30 Steering Gear Replacement
13.
Remove steering gear attaching bolts, then remove, Fig. 30.
14.
Reverse procedure to install.
15.
Restore coded theft protection system and rearm airbag.
