Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Suspension Spring ( Coil / Leaf ): Technical Service Bulletins
Tools - Damper Spring Compressor
August 19, 1991
BULLETIN NO.
91-042
YEAR
1991
MODEL
LEGEND
VIN APPLICATION
ALL
Damper Spring Compressor
A new tool is needed to properly service the front dampers on the 1991 Legend Sedan and Coupe. Use the Branick(R) MST-580A Strut Spring
Compressor when replacing the damper unit, spring, or damper components. This tool is necessary due to the increased spring length, coil diameter, and
spring preload.
ORDERING INFORMATION
Company
Tool Name
Part Number
Myers(R) Tire Supply
Branick(R) MST-580A
03-071
1293 South Main St.
Strut Spring Compressor
Akron, Ohio 44301
(216) 253-5592
Snap-On(R) Tool
Strut Spring Compressor
BRNMST580A
Corporation
(Contact your local Snap-On(R)
Tool Representative)
NOTE:
Equipment cost may vary from vendor to vendor.
The product, manufacturer and suppliers listed in this bulletin are brought to your attention solely for your information and investigation. American
Honda disclaims any responsibility concerning this product. This listing is based on information supplied by the tool manufacturer.