Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
6. Remove the wheel sensor from the knuckle.
NOTE: Do not disconnect the wheel sensor connector.
7. Remove the caliper bracket mounting bolts, and hang the caliper assembly to one side.
CAUTION: To prevent accidental damage to the caliper or brake hose, use a short piece of wire to hang the caliper from the under-carriage.
8. Remove the 6 mm brake disc retaining screws.
CAUTION: Be careful not to damage the ball joint boot.
9. Screw two 8 x 12 mm bolts into the disc to push it away from the hub.
NOTE: Turn each bolt two turns at a time to prevent cocking the disc excessively.