acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Fluid - A/T|Specifications > < A/T - Cooler Flushing Procedure|Page 6474
Page 3
background image

3.

Clean the blocked orifice by disconnecting the plumbing from the tank at the large coupling nut.

4.

Remove the in-line filter from the discharge side and clean it necessary.

5.

The fluid orifice is located behind the filter; clear it with the pick (screwed into the bottom of the tank handle) or blow with air.

6.

Securely reassemble all removed parts.

WARRANTY CLAIM INFORMATION

This bulletin covers technical procedures only. The flat rate time is included in the operations for automatic transmission replacement, overhaul, and
exchange. The 1988-89 Flat Rate Manual reflects this change.

Fluid - A/T|Specifications > < A/T - Cooler Flushing Procedure|Page 6474