Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
Cable Adjustment (in Car):
26.
Attach the shift cable to the link with the lock pin.
27.
Set the parking brake and press on the brake pedal so the car will not move. Start the engine and move the shift lever to Reverse. Turn off the
engine.
28.
Remove the lock pin from the cable adjuster. Check the alignment of the hole in the adjuster to the hole in the shift cable. If they are not perfectly
aligned, loosen the locknut and adjust as needed. Tighten the locknut.
29.
Reinstall the lock pin.
30.
Press on the brake pedal, start the engine. Move the shift lever to Neutral. Verity that the index mark on the shift lever aligns with the N mark on
the shift indicator panel when the transmission is in Neutral.
31.
With your foot on the brake, shift slowly from Neutral to Reverse and Neutral to Drive. Using the R and D4 marks for reference, note the position
of the shift lever index mark when the transmission engages each gear. Reverse and Drive should each engage an equal distance from Neutral. If
one is closer than the other, remove the shift cable adjuster lock pin and adjust the linkage accordingly.
32.
Do the following checks:
^
Try to start the engine in all shift positions. It should start only in Park and Neutral.
^
Shift to Park and turn off the engine. Try to rock the car. It should not move.
^
Try to shift from Neutral to Reverse without pressing the release button. It should not shift.
^
Verify the back-up lights only come on in Reverse.
^
Try to shift out of Park without pressing on the brake pedal. You should not be able to.
^
Insert the key in the console Shift Lock Release.
Verify that it works correctly.
^
Verify that the shift position indicator on the instrument panel shows the same gear position as indicated on the console.
