Legend Coupe V6-3206cc 3.2L SOHC FI (1991)
5.
Using the metal tab protruding from the quarter molding as a starting point, attach the lower molding outer lip. Line up the first notch in the
molding outer lip with the metal tab.
6.
Attach the rubber trim of the molding outer lip to the quarter molding:
^
Inject instant adhesive into 3-4 inches of the molding inner lip, and attach it to the quarter molding.
^
Immediately clean the excess adhesive off of the molding and the molding lip with debonder.
^
Continue to glue the rest of the molding inner lip in 3-4 inch increments, wiping off the excess adhesive.
NOTE:
Use a slow, thick consistency instant adhesive. A thick consistency adhesive bonds better and is easier to apply.
7.
Inspect the quarter window rubber trim, if the rubber trim is loose or missing, refer to Service Bulletin 91-044, and repair as necessary.
8.
Reinstall the quarter window molding and the run channel. Run the window up and down to confirm proper operation and sealing.
PARTS INFORMATION
Left Quarter Molding Lip Kit:
P/N 04750-SP1-003
Right Quarter Molding Lip Kit:
P/N 04730-SP1-003
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must request
consideration, and get the DSM's decision, before starting work.