Legend Sedan V6-2494cc 2.5L SOHC FI (1987)
Fuel Pressure Regulator: Testing and Inspection
Sedan
Pressure Regulator Test
WARNING: Do not smoke during the test. Keep open flames away from your work area.
1. Check the vacuum line for proper connection, cracks, blockage or disconnected hose.
2. Disconnect # 1 vacuum hose from the pressure regulator, and connect a vacuum gauge to the hose.
3. Start the engine and allow to idle.
4. Check for vacuum.
There should be vacuum.
-
If there is no vacuum, go to pressure regulator cut-off solenoid valve test II.
5. Stop the engine.
6. Restart the engine.
NOTE:
-
Engine coolant temperature must be above 105°C (221°F).
-
Intake air temperature must be above 80°C (176°F).
7. Check for vacuum.
There should be no vacuum.
-
If there is vacuum, go to pressure regulator cutoff solenoid valve test I.
8. Stop the engine.