Service and Repair for Legend Sedan V6 Arm Rest Moulding/Trim
Arm Rest: Service and Repair
NOTE: SRS wire harnesses are routed near the center console panel and center armrest.
CAUTION:
-
All SRS wiring harnesses are covered with yellow outer insulation.
-
Before disconnecting any part of the SRS wire harness, install the short connectors.
-
Replace the entire affected SRS harness assembly if it has an open circuit or damaged wiring.
NOTE:
-
Take care not to scratch the dashboard and related parts.
-
Do not drop the screws inside the center console.
CAUTION: When prying with a flat tip screwdriver, wrap it with protective tape to prevent damage.
