Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
ABS Main Relay: Testing and Inspection
Relay Inspection
1. Remove the fail safe-relay from the relay box C.
2. Check for continuity between the terminals A and B. There should be no continuity.
3. Connect a 12 V battery across the terminals C and D. There should be continuity between the terminals A and B.
4. Remove the motor relay from the under-hood relay/fuse box.
5. There should be continuity between the C and 0 terminals.
6. There should be continuity between the A and B terminals when the battery is connected to C and D terminals.
There should be no continuity when the battery is disconnected.
