Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
5. Bleed high-pressure fluid from the maintenance bleeder with the special tool.
6. Start the engine and allow it to idle for a few minutes, then stop it. Check the fluid level in the modulator reservoir and refill to the MAX level line
if necessary.
7. Turn the Mode Selector switch of the checker to 2.
8. While depressing the brake pedal firmly, push the Start Test switch to operate the modulator. There should be kickback on the brake pedal. If not,
repeat steps 5 to 8.
NOTE: Continue to depress the brake pedal firmly when operating the checker.
9. Turn the Mode Selector to 3, 4 and 5.
10. Refill the modulator reservoir to the MAX level line and install the reservoir cap.
Warning:
-
Disconnect the ALB Checker before driving the car. A collision can result from a reduction or complete loss of braking ability, causing
severe personal injury or death.
