Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Brake Rotor/Disc: Testing and Inspection
Disc Runout
Runout Inspection
1. Support the rear of the car on safety stands and remove the rear wheels.
2. Remove the rear brake caliper. See: Brake Caliper/Service and Repair
3. Inspect the disc surface for grooves, cracks, and rust. Clean the disc thoroughly and remove all rust.
4. Use suitable nuts (12 x 1.5 mm) and plain washers to hold the disc securely against the hub. Torque nuts to 110 Nm (11 kg-m, 80 lb-ft). Mount a
dial indicator as shown.
Brake Disc Runout:
Service Limit: 0.10 mm (0.004 in)
5. If the disc is beyond the service limit, refinish the disc.
NOTE: A new disc should be refinished if its runout is greater than 0.10 mm (0.004 in).