Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Radiator Cooling Fan Motor: Description and Operation
Manual A/C
Manual A/C
The fans use two control units: the fan control unit and the radiator fan control module. The fan system has two speeds: LOW and HIGH.
The radiator fan control module can turn ON the condenser and radiator fan motors anytime during the first 30 minutes after the engine has been shut
OFF. The engine oil temperature switch will close when the engine oil temperature is above 101-109°C (214-228°F). The engine oil temperature switch
input to the radiator fan control module causes it to energize the condenser fan relay. This, in turn, allows battery voltage through fuse 50 to energize the
condenser and radiator fan motors, and both motors then run at low speed. They can begin running as soon as five seconds after the engine is turned
OFF.
Low-Speed Operation
Both fans will come on and run at low speed when the radiator fan control sensor measures coolant temperature between 78°C (172°F) and 84°C (183°
F). They will keep running until the coolant temperature falls below 78°C (172°F).
The radiator fan control module will then energize and ground the coil of the condenser fan relay causing its contacts to close. This allows battery
voltage through fuse 50 to energize the condenser fan motor through the radiator fan main relay and the radiator fan motor. Both fan motors will then run
at low speed.
High Speed Operation
Both fans will come ON and run at high speed when the radiator fan control sensor measures coolant temperature at 90°C (194°F). They will continue
running at high speed until the coolant temperature falls below 84°C (183°F). With the ignition switch in ON (II), the fans begin running when the
radiator fan control module grounds both the radiator fan relay and radiator fan main relay coils (through the fan control unit), energizing both relays.
The radiator fan motor will then be powered through fuse 47 and the closed contacts of the radiator fan relay. The condenser fan motor will be powered
through fuse 50 and the closed contacts of the condenser fan relay. The condenser fan motor will have a direct path to ground through the radiator fan
main relay and the radiator fan motor.
