Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Fig. 84 Connecting Rod Bearing Identification
2. Numbers are stamped on the side of each connecting rod to code the size of the large end. Use these numbers in conjunction with letters stamped
on crankshaft, Fig. 84, to select correct bearings.
3. A bearing cap bridge is used to increase torsional rigidity. When installing main bearings, first torque main bearing cap bolts to 29 ft. lbs., then
torque 11 mm bridge bolts to 57 ft. lbs., working diagonally from center of bridge.
4. Torque side cap bolts to 36 ft. lbs.