Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Fuel Pressure Release: Service and Repair
WARNING
^
Do not smoke while working on the fuel system. Keep open flames or sparks away from your work area.
^
Be sure to relieve fuel pressure while the engine is off.
NOTE: Before disconnecting fuel pipes or hoses, release pressure from the system by loosening the 6 mm service bolt on top of the fuel filter.
1. Disconnect the battery negative cable from the battery negative terminal.
NOTE: The L and LS model radio has a coded theft protection circuit. Be sure you get the customer's code number before disconnecting the
battery cable.
2. Remove fuel fill cap.
3. Use a box end wrench on the 6 mm service bolt at the fuel filter, while holding the special banjo bolt with another wrench.
4. Place a rag or shop towel over the 6 mm service bolt.
5. Slowly loosen the 6 mm service bolt one complete turn.
NOTE:
^
A fuel pressure gauge can be attached at the 6 mm service bolt hole.
^
Always replace the washer between the service bolt and the special banjo bolt, whenever the service bolt is loosened to relieve fuel pressure.
^
Replace all washers whenever the bolts are removed to disassemble parts.