Legend Sedan V6-3206cc 3.2L SOHC FI (1995)
Crankshaft Main Bearing Seal: Service and Repair
REMOVAL
Gently pry crankshaft oil seal from the rear engine cover.
INSTALLATION
1. Using the special tool, drive the crankshaft oil seal into the rear cover.
NOTE: The seal surface on the block should be dry. Apply a light coat of oil to the crankshaft and to the lip of the oil seal.
2. Confirm that the clearance is equal all the way around with a feeler gauge.
^
Clearance: 0.2-0.5 mm (0.01-0.02 inch)
